The following board was custom designed for Mark on  AKU Shaper.  The Board is made of an interior wooden skeleton.  The deck and bottom of the board are made up of arranged strips of 1/4 inch thick Bass and Mahogany wood.   The rails are made by bending strips  of Maple and cork board .  The bottom and deck where glassed with a 4oz layer of fiberglass with epoxy resin.  After the rails where formed the board had another layer of 4 oz, top and bottom, with Resin Research Epoxy. The fins are boxed in, using a “Future Fin” Keel  set up……..enjoy.